Home

CARA MENGATASI ERROR E5-5

E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly

1. Gunakan lap bersih dan lembab usapkan pada connector catrigenya pelan pelan sampai bersih.

Prinsip dasarnya tinta yang mengering atau tinta yang basah atau bahkan kerak yang ada di connector catrige akan mengganggu koneksi antara catrige dan rumah catrige yang berisi pin-pin banyak. sehingga catrige tidak bisa mendeteksi keberadaan catrige dengan sempurna.

2. Sedot kembali semua tinta yang ada di catrige dengan sangat pelan pelan sampai habis (di sedot di beberapa sisi sudah tidak ada tinta). gunakan tisu yang di celup air HANGAT (bukan panas) untuk membersihkan head. Baru setelah itu isi kembali tintanya dengan sepertiga isi. jangan sampai terisi separo atau bahkan penuh. Pasang kembali ke rumah catrigenya.

CARA MENGATASI E27

1. Biarkan Kabel power tetap terkoneksi ke sumber arus.

(Tdk perlu mencabut kabel power saat printer masih menyala).

2. Tekan dan tahan tombol Stop/Reset.

3. Tekan dan tahan tombol Power (tombol Stop/Reset tetap di tekan)

4. Tetap tekan tombol Power, kemudian lepas tombol Stop/Reset.

5. Tekan tombol Stop/Reset 2x kemudian lepas lepas tombol Power.

” Tunggu sampai angka 0 muncul di display “

6. Tekan tombol Stop/Reset 1x.

7. Tekan tombol Power 1x, printer akan mencetak 1 lembar kertas.

8. Tekan tombol Stop/Reset 2x.

9. Tekan tombol Power 1x, printer akan mecetak 1 lembar kertas

10. Tekan tombol Stop/Reset 3x.

11. Tekan tombol Power 1x. (tidak ada proses pencetakan)

12. Tekan tombol Stop/Reset 4x

13. Tekan tombol Power 1x agak lama & lepas (utk mematikan printer).

” Jika printer tetap tidak bisa dimatikan, cabut kabel power printer “.

14. Nyalakan printer.

15. Pesan error E27 sudah hilang & printer sudah berjalan normal

Solusi Error E16 pada Canon seri MP

If you search what's that mean E16 at printer Canon MP Series, the error E16 code is Failed to scan head alignment sheet. I will tell you how to fix the E16, see at below :

- If you see at Printer Status monitor while you printing, you will get the dialog it says your ink is running low.

- So what you need to do? Press the START button, then until 2-3 second press START button again.

Reset Ink Level pada Canon ip1880, MP145, MP530

Hal ini muncul karena level tinta di catrik terbaca habis oleh printer, walaupun tinta di infus masih banyak ataupun barusan di refill.

Untuk mengatasi hal ini cukup guampangggg.... tekan aja tombol RESUME selama beberapa detik (5-8 detik) setelah itu ink level akan ter-reset otomatis dan printer akan meneruskan cetakan.

Hal yang sama berlaku untuk printer Canon ip1200,1300,1600,1700,2200.

Sedangkan untuk tipe Canon MP160, MP145 cukup tekan tombol COLOR untuk mereset ink levelnya...

Untuk tipe multfunction yang lebih tinggi, seperti tipe MP530, MP500, MP830, MP800 (sejenisnya) bisa dengan menekan tombol STOP.

Reset Waste Ink Canon Pixma iP1700, 1880, 1600, 1200, 1300

Kali ini membahas yang namanya cara mereset Printer Canon tipe sejuta umat

Resetter Canon Pixma iP1200, iP1300, iP1500, iP1600, iP1700, iP1880, iP2200

Langkah 1: Masuk ke Service Mode

Matikan Printer

1. Lepaskan kabel Power dan USB

2. Tekan dan tahan tombol POWER, colok kabel POWER

3. Tekan RESUME 2x, lepaskan tombol POWER dan RESUME

4. Lampu akan kedap-kedip beberapa saat, tunggu hingga lampu menyala stabil

Langkah 2 : Reset dengan Software Permanen

1. Colok kembali kabel USB

2. Silahkan buka GENERAL TOOLS SOFTWARE dan pilih USB PORT

3 .Centang di EEPROM CLEAR

4. Klik MAIN sekali (lampu printer akan kedip 1x)

5. Kemudian klik TEST PATTERN 1

6. Matikan printer

Manual reset for canon pixma iP 1980 it easy and like resetting canon ip 1880. If found problem in your printer canon iP 1980 maybe this methode can be use. This reset manual be used to reset waste ink counter in canon pixma iP 1980.

Here how :

1. Press Resume button hold for 1 – 2 minutes and then release Resume button.

2. Open the cover

3. Release the catridge and then put catridge again

4. Close The Cover then Turn Off the printer then Turn On again. the Printer will back to normal again.

ERROR CODE CANON IP1300, IP1700, IP1200, IP1880, IP1980

3x orange 1x hijau = mekanik error

4x orange 1x hijau = absorber full > direset dengan General tools

5x orange 1x hijau = cartirdge black/colour bermasalah

7x orange 1x hijau = cartirdge black/colour bermasalah

8x orange 1x hijau = absorber full > Perlu direset melalui General tools

12x / 15x orange 1x hijau = cartridge detection

ERROR CODE CANON MP145, MP160, MP198, MP258

E2-2 = tidak ada kertas (ASF)

E3-3 = Paper jam

E4 = tidak ada tinta/cartridge

E5-5 = ink cartridges tidak terpasang atau cartirdge yang terpasang salah (tidak compatibel)

E8 = absorber full, atau platen waste ink absorber full mita direset

E9 = hubungan ke digital camera / video camera tidak support

E14 = Ink cartridges whose destination are wrong

E15 = Ink cartridge tidak terpasang

E16 - Ink remaining is unknown

E16 -E19 = masalah pada scan head alignment sheet

E22 = Carriage error

E23 = Paper feed error

E24 = Purge unit error (bagian cleaning head)

E25 = ASF(cam) sensor error

E26 = Internal temperature rise error

E27 = ink absorber full or platen waste ink absorber full > reset dengan toolsnya

E28 = Ink cartridge temperature rise error -

E29 = EEPROM error

E33 = Paper feed position error

E35 15 = USB Host VBUD overcurrent error - USB

E37 17 = motor driver tidak normal

E40 20 = hardware lain error

E42 22 = Scanner errorit’s work as same as Canon MP 150 or MP 160,

RESET CANON PIXMA iP1000

Waste Ink Counter Reset.

Langkah 1: Manual for Service mode

1. Lepaskan kabel Power dan USB

2. Tekan dan tahan tombol POWER dan colok kabel POWER

3. Tekan tombol RESUME 2x, kemudian lepas keduanya

4. Colok kabel USB

Lankah 2 : Software untuk Reset Permanant

1. Klik link di bawah ini

2. Download General Tools T5061, pilih (USB PORT)

3 .Pilih EEPROM CLEAR dan klik TEST PATTERN 1

4. Masukkan kertas dan printer akan mencetak printout data EEPROM dan melakukan test printhead utk semua nozzle (hitam dan warna)

5. Matikan printer.

Step 1 : Manual for Service Mode

1. Turn off the printer. And disconnect the printer cable.

2. Press and hold the POWER button, turn on the printer.

3. The indicator (L.E.D.) should be green.

4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.

5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.

6. Release both buttons.

7. Connect USB cable

Step 2 : Software for permanent reset

1. Reconnect the printer cable.

2.Open General Tools T5061 and select (USB PORT)

3 .Check on EEPROM CLEAR

4. Click TEST PATTERN 1

CANON IP1980 RESETTER

Nota : Boleh gunakan reseter IP1980

1.Tekan butang Power dan sambungkan Power Cable dan lepaskan

butang Power

2.Tekan butang Power lagi untuk menghidupkan printer

3.Buka program iptool.exe

4.Disana ada 2 menu, Ink Counter dan Waste Ink Counter

5.Di kotak menu Ink Counter klik Reset Black dan Reset Colour

6.Pada Waste Ink Counter klik Reset Main dan Reset Platen

7.Tutup (Switch Off ) printer Canon IP 1980.

8.Tekan kembali butang Power dan printer sepatutnya telah berada

di dalam keadaan yang baik.

RESET WASTE INK CANON MP 190

Canon MPC190

Reset Waste Ink

1) Masuk ke SERVICE MODE.

dengan menekan Menu, Copy, Scan, Copy, Copy (tekan saja urutan tombolnya, jgn ditahan)

2) Pilih TEST MODE.

3) Pilih [8] PRINTER TEST in TEST MODE.

4) Pilih 3. [EEPROM CLEAR].

5) Piliht 0. [INK COUNT].

6) Tekan tombol [Set]

7) Tekan tombol [Stop/Reset] , kemudian tekan tombol [ON/OFF]

CANON MP198 RESETTER.

1. Start with printer OFF

2. Hold down RESUME and then hold down POWER

3. Release RESUME

4. press RESUME twice, then release POWER

5. let green light blink until printhead has finished moving.

6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)

1 press - orange light - EEPROM info print

2 presses - green light - EEPROM initialise

3 presses - orange light - reset waste ink counter.

CANON MP145 / MP160 RESETTER

Cara dibawah ini digunakan untuk memperbaiki printer yang

mempunyai pesan ERROR E27

1. Matikan printer(pastikan kabel power masih terpasang), tekan dan

tahan tombol STOP/RESET kemudian tekan dan tahan tombol ON/OFF

dan lepas STOP/RESET,

kemudian tekan tombol STOP/RESET 2x

2. Lepaskan kedua tombol, sekarang printer dalam posisi

SERVICE MODE (pada LCD printer muncul angka"0")

3. Setelah lampu on/off berwarna hijau, silahkan tekan tombol

STOP/RESET sesuai dengan petunjuk berikut:

di tekan 1x = lampu Orange nyala >untuk Service pattern print

di tekan 2x = lampu Hijau nyala >untuk EEPROM print

di tekan 3x = lampu Orange nyala >untuk EEPROM reset

di tekan 4x = Lampu Hijau Nyala >untuk Waste ink counter reset

4. Matikan printer dan cabut kabel POWER.

5. Hidupkan kembali printer anda

BEFORE activating MPTool...you need to To activate LOW LEVEL

mode:

1. Unplug the power cord to the printer for a moment.

2. Then, hold*down the on/off*button while plugging in the power cord.

Keep holding the on/off button down.

3. Right away the green power light (in the button) will turn on solid.*

Keep holding the on/off button down.

4. Press and release the Stop/Reset button.

(the button w a red triangle in a red circle)

5. Now you can release the on/off*putton.

The* green power light will go off and the yellow Alarm light will stay on.

Now you can run MPTOOL and resetting the ink counters will work.

Your printer will show up as "another" Cannon printer.

When you finish you must again unplug the power cord for a moment

and then just plug it back in. After you do this, you'll see both

printers listed in Printers (controll panel) and one will show as

offline. You can then rename this offline printer as "Low Mode Canon"

or whatever works for you so you don't mix it up with other functions.

Cara Reset Printer Canon Pixma MP258

Jika printer anda terpasang (ON), sila matikan dahulu.

Tekan tombol Stop/Reset, jangan dilepaskan.

Tekan tombol ON dan tunggu sehingga lampu hijau menyala, jangan dilepaskan.

Lepaskan tombol Stop/Reset, kemudian tekan tombol Stop/Reset sebanyak dua (2) kali.

Lepaskan tombol ON.

Tunggu sehingga skrin paparan pada printer memaparkan angka 0.

Tekan lagi Tombol Stop/Reset sebanyak empat (4) kali.

Tekan tombol ON, printer akan memutarkan pemutar kertas beberapa saat dan printer akan mati secara automatik.

Buka kembali printer anda dengan menekan tombol ON.

Tahniah, anda telah berjaya reset status printer anda. Jika masih terdapat masalah "Ink Counter" sila ulangi langkah-langkah di atas.

MP258 Service tool Tthis is way to reset canon MP258 ffirst please turn on your printer

the step is

- connect the power but printer still off

- press Stop button and hold and then press the power button and hold

- while you hold down the Power button, release the stop button 2 times

remember the power button still hold on

- take your finger together

- the computer will detect a new device may you ignore them

- this situasion is showing that printer on Service mode

- extract the tools

- you will need 2 paper while you do the reset

- run the tools resetter mp258 for error 5B00 or P07

To reset permanent please download the resetter MP258 here

MP198. Reset Waste Ink full canon

1. Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy

2. Select TEST MODE.

3. Select [8] PRINTER TEST in TEST MODE.

4. Select 3. [EEPROM CLEAR].

5. Select 0. [INK COUNT].

6. Press the [Set] key.

7. Press the [Stop/Reset] key (returning to the state of

3)), and then press the [ON/OFF] key

After reset manual now remained the reset permanenly using

but it's for MPC 190 not MP 190 pixma :

I'll find this one:

Waste Ink Counter Reset.

(1) Turn off the printer.

(2) Press and hold the RESUME button, then press and hold the POWER

button.

(3) Release the RESUME button, Next press and release the RESUME

button two(2) more times in

succession. Note: you are still holding the POWER button). The

printer's carriage will "reset"

or move momentarily. If the above was properly performed the

printer will enter the

"Service Mode".

(4) Press the RESUME button 4 times, this will select the clear waste ink

counter function. The lamp

will alternate (change) color with each key press.

1. Service/Factory test printout, including ink sensor check.

2. EEPROM - Info printout.

3. EEPROM - Initialization.

4. Reset the Waste ink counter.

5. Printer model setting. (More selections beyond this point -

However it is best leave them unaltered - You have been warned!)

After selecting the desired mode (eg 4), press the POWER button to

"set" the change, and return to the top of the function selection menu.

Press the POWER button again to restart the printer.

MPtool reset MP190

1. Start with printer OFF

2. Hold down STOP/RESET and then hold down POWER

3. Release STOP/RESET (donï¿½t let go of the power just yet)

4. press STOP/RESET twice, then release POWER

5. let green light blink until printhead has finished moving.

6. Run Service Mode Tools Version 1[1].050

7. Set location Set: ASA (Asia Pacific) depends on your location

8. Put paper in paper feeder Set Clear Waste Ink Choose: Main&Plater

9. Test Print Click Cleaning1 Button

10.Clear Waste ink Click Main Button

11.if theres no longer activity in the printer press Stop/Reset Button.It will print waste ink status (D=000.0 Ps=000.0)

12.Click Platen Button. It will print waste ink status (D=000.1 Ps=000.0)

13. Turn off and ON printer

14. Enjoy!!!! Printer waste ink absorber counter was succesfully reset.

Procedure on how to Reset Canon MP198 Ink Level